Tool Steel : 1.2550 / 60WCrV8

Product Description

1.2550 Alloy Steel Round Bar, 60WCrV8 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2550  Round Bars, 1.2550  Alloy Steel Round Forged Bars, 1.2550  Double Temper Forged Rods, 1.2550  Black Round Bars, 1.2550  Aircraft Quench Bright Round Bars, 1.2550  Normalised Rolled Round Bars, 1.2550  Austenitise Peeled Round Bars, 1.2550  Proof Machined Round Bars, 1.2550  Threaded Round Bars, 1.2550  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2550  Round Bars: 6mm upto 1200mm

Length for 1.2550  Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2550  Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2550  Round Bars: Bright & Black

1.2550  Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2550  Round Bars, 1.2550  Round Forged Bars, 1.2550  Double Temper Forged Rods, 1.2550  Black Round Bars, 1.2550  Aircraft Quench Bright Round Bars, 1.2550  Normalised Rolled Round Bars, 1.2550  Austenitise Peeled Round Bars, 1.2550  Proof Machined Round Bars, 1.2550  Threaded Round Bars, 1.2550  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2550  Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2550  Round Bars, 1.2550  Alloy Steel Round Forged Bars, 1.2550  Double Temper Forged Rods, 1.2550  Black Round Bars, 1.2550  Aircraft Quench Bright Round Bars, 1.2550  Normalised Rolled Round Bars, 1.2550  Austenitise Peeled Round Bars, 1.2550  Proof Machined Round Bars, 1.2550  Threaded Round Bars, 1.2550  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Wear Resistance

Tool Steel 1.2550 stands out for its robust wear resistance and consistent strength even under intense stress. These attributes make it highly suitable for components and tools subjected to repetitive impacts and high-pressure environments such as punches, chisels, and extrusion dies, ensuring superior operational durability.


Diverse Industrial Applications

From manufacturing die nuts to fabricating sheer blades and trimming dies, this tool steels versatility supports various industrial sectors. Its reliable characteristics make it an asset for toolmakers, automakers, and heavy machinery industries, especially where precision and strength are crucial.