Inconel Alloy 725 : N07725

Product Description

Inconel 725 Alloy Steel Round Bar, N07725 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel Inconel 725  Round Bars, Inconel 725  Alloy Steel Round Forged Bars, Inconel 725  Double Temper Forged Rods, Inconel 725  Black Round Bars, Inconel 725  Aircraft Quench Bright Round Bars, Inconel 725  Normalised Rolled Round Bars, Inconel 725  Austenitise Peeled Round Bars, Inconel 725  Proof Machined Round Bars, Inconel 725  Threaded Round Bars, Inconel 725  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for Inconel 725  Round Bars: 6mm upto 1200mm

Length for Inconel 725  Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of Inconel 725  Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for Inconel 725  Round Bars: Bright & Black

Inconel 725  Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel Inconel 725  Round Bars, Inconel 725  Round Forged Bars, Inconel 725  Double Temper Forged Rods, Inconel 725  Black Round Bars, Inconel 725  Aircraft Quench Bright Round Bars, Inconel 725  Normalised Rolled Round Bars, Inconel 725  Austenitise Peeled Round Bars, Inconel 725  Proof Machined Round Bars, Inconel 725  Threaded Round Bars, Inconel 725  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel Inconel 725  Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel Inconel 725  Round Bars, Inconel 725  Alloy Steel Round Forged Bars, Inconel 725  Double Temper Forged Rods, Inconel 725  Black Round Bars, Inconel 725  Aircraft Quench Bright Round Bars, Inconel 725  Normalised Rolled Round Bars, Inconel 725  Austenitise Peeled Round Bars, Inconel 725  Proof Machined Round Bars, Inconel 725  Threaded Round Bars, Inconel 725  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Corrosion and Strength Performance

Inconel Alloy 725 offers outstanding resistance to both general and localized corrosion, even in highly aggressive settings like marine or subsea environments. Its superior strength, enhanced by age hardening, supports critical components such as fasteners, turbine parts, and valve bodies in demanding industrial sectors. This reliability makes it a preferred choice for safety-critical applications in India and worldwide.


Diverse Applications Across Industries

The alloys unique properties make it versatile, finding use in oil and gas, marine, construction, and heavy engineering industries. Common applications include hangers, side pocket mandrels, steam and gas turbine components, marine fasteners, and subsea valve stems and bodies. Its adaptability ensures structural stability and longevity in systems facing high stress and corrosive elements.