High Speed Tool Steel Without Cobalt : 1.3355 / HS18-0-1

Product Description

1.3355 Alloy Steel Round Bar, HS18-0-1 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.3355 Round Bars, 1.3355 Alloy

Steel Round Forged Bars, 1.3355 Double Temper Forged Rods, 1.3355 Black Round Bars, 1.3355 Aircraft

Quench Bright Round Bars, 1.3355 Normalised Rolled Round Bars, 1.3355 Austenitise Peeled Round

Bars, 1.3355 Proof Machined Round Bars, 1.3355 Threaded Round Bars, 1.3355 Normalized Round Bars,

Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars,

Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods

Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous

Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS),

Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof

Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged,

Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut,

Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined

Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets),

Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting,

Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI,

ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for 1.3355 Round Bars: 6mm upto 1200mm

Length for 1.3355 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.3355 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched

/ Tempered

Surface Finish for 1.3355 Round Bars: Bright & Black

1.3355 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet

Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM

DEGASSING (VD) route Alloy Steel 1.3355 Round Bars, 1.3355 Round Forged Bars, 1.3355 Double Temper

Forged Rods, 1.3355 Black Round Bars, 1.3355 Aircraft Quench Bright Round Bars, 1.3355 Normalised

Rolled Round Bars, 1.3355 Austenitise Peeled Round Bars, 1.3355 Proof Machined Round Bars, 1.3355

Threaded Round Bars, 1.3355 Normalized Round Bars, Annealed Round Bars, Heat Treated Round

Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress

Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel 1.3355 Round Bars online ready stock from us at

premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.3355 Round Bars, 1.3355 Alloy Steel Round Forged Bars, 1.3355

Double Temper Forged Rods, 1.3355 Black Round Bars, 1.3355 Aircraft Quench Bright Round Bars,

1.3355 Normalised Rolled Round Bars, 1.3355 Austenitise Peeled Round Bars, 1.3355 Proof Machined

Round Bars, 1.3355 Threaded Round Bars, 1.3355 Normalized Round Bars, Annealed Round Bars, Heat

Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold

drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite

structure, etc. kindly do contact us.

Superior Efficiency for Industrial Applications

HS18-0-1 tool steel stands out for its impressive hardness and wear resistance, enabling manufacturers and engineers to produce precision tools and components. This material excels in environments demanding rapid cutting, extended tool life, and reduced maintenance downtime, ensuring consistent results in sectors like aerospace and steel manufacturing.


Cobalt-Free Advantage

By eliminating cobalt, 1.3355 / HS18-0-1 offers significant economic and environmental benefits. It maintains high-speed steel performance while reducing production costs, making it an appealing choice for toolmakers and fabricators who require reliable materials for complex industrial operations.