Nitriding 135M per AMS 6471

Product Description

Nitriding 135M per AMS 6471 Alloy Steel Round Bar, Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel Nitriding 135M per AMS 6471 Round Bars, Nitriding 135M per AMS 6471 Alloy Steel Round Forged Bars, Nitriding 135M per AMS 6471 Double Temper Forged Rods, Nitriding 135M per AMS 6471 Black Round Bars, Nitriding 135M per AMS 6471 Aircraft Quench Bright Round Bars, Nitriding 135M per AMS 6471 Normalised Rolled Round Bars, Nitriding 135M per AMS 6471 Austenitise Peeled Round Bars, Nitriding 135M per AMS 6471 Proof Machined Round Bars, Nitriding 135M per AMS 6471 Threaded Round Bars, Nitriding 135M per AMS 6471 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for Nitriding 135M per AMS 6471 Round Bars: 6mm upto 1200mm

Length for Nitriding 135M per AMS 6471 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of Nitriding 135M per AMS 6471 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for Nitriding 135M per AMS 6471 Round Bars: Bright & Black

Nitriding 135M per AMS 6471 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel Nitriding 135M per AMS 6471 Round Bars, Nitriding 135M per AMS 6471 Round Forged Bars, Nitriding 135M per AMS 6471 Double Temper Forged Rods, Nitriding 135M per AMS 6471 Black Round Bars, Nitriding 135M per AMS 6471 Aircraft Quench Bright Round Bars, Nitriding 135M per AMS 6471 Normalised Rolled Round Bars, Nitriding 135M per AMS 6471 Austenitise Peeled Round Bars, Nitriding 135M per AMS 6471 Proof Machined Round Bars, Nitriding 135M per AMS 6471 Threaded Round Bars, Nitriding 135M per AMS 6471 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel Nitriding 135M per AMS 6471 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel Nitriding 135M per AMS 6471 Round Bars, Nitriding 135M per AMS 6471 Alloy Steel Round Forged Bars, Nitriding 135M per AMS 6471 Double Temper Forged Rods, Nitriding 135M per AMS 6471 Black Round Bars, Nitriding 135M per AMS 6471 Aircraft Quench Bright Round Bars, Nitriding 135M per AMS 6471 Normalised Rolled Round Bars, Nitriding 135M per AMS 6471 Austenitise Peeled Round Bars, Nitriding 135M per AMS 6471 Proof Machined Round Bars, Nitriding 135M per AMS 6471 Threaded Round Bars, Nitriding 135M per AMS 6471 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Precision Material for Demanding Aerospace Needs

Nitriding 135M per AMS 6471 is specifically engineered for the aerospace and rotorcraft sectors, supporting the manufacture of gears, crankshafts, pinions, and bushings. Its composition and hardness provide exceptional fatigue and wear resistance, vital for components exposed to high stress and cyclic loading. This grade guarantees consistent performance in critical applications, making it the standard choice for demanding engineering tasks.


Versatility in Metalworking Applications

The availability of Nitriding 135M in diameters from 0.750 to 4.000 mm offers flexibility for metalworking professionals. From prototyping to production, it serves a wide spectrum of applications beyond aerospace, including high-performance mechanical and automotive parts. This steels reliable properties simplify machining and ensure longevity, reducing maintenance needs and lifecycle costs.