A286 per AMS 5732

Product Description

A286 per AMS 5732 Alloy Steel Round Bar, Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel A286 per AMS 5732 Round Bars, A286 per AMS 5732 Alloy Steel Round Forged Bars, A286 per AMS 5732 Double Temper Forged Rods, A286 per AMS 5732 Black Round Bars, A286 per AMS 5732 Aircraft Quench Bright Round Bars, A286 per AMS 5732 Normalised Rolled Round Bars, A286 per AMS 5732 Austenitise Peeled Round Bars, A286 per AMS 5732 Proof Machined Round Bars, A286 per AMS 5732 Threaded Round Bars, A286 per AMS 5732 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for A286 per AMS 5732 Round Bars: 6mm upto 1200mm

Length for A286 per AMS 5732 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of A286 per AMS 5732 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for A286 per AMS 5732 Round Bars: Bright & Black

A286 per AMS 5732 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel A286 per AMS 5732 Round Bars, A286 per AMS 5732 Round Forged Bars, A286 per AMS 5732 Double Temper Forged Rods, A286 per AMS 5732 Black Round Bars, A286 per AMS 5732 Aircraft Quench Bright Round Bars, A286 per AMS 5732 Normalized Rolled Round Bars, A286 per AMS 5732 Austenitise Peeled Round Bars, A286 per AMS 5732 Proof Machined Round Bars, A286 per AMS 5732 Threaded Round Bars, A286 per AMS 5732 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel A286 per AMS 5732 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel A286 per AMS 5732 Round Bars, A286 per AMS 5732 Alloy Steel Round Forged Bars, A286 per AMS 5732 Double Temper Forged Rods, A286 per AMS 5732 Black Round Bars, A286 per AMS 5732 Aircraft Quench Bright Round Bars, A286 per AMS 5732 Normalised Rolled Round Bars, A286 per AMS 5732 Austenitise Peeled Round Bars, A286 per AMS 5732 Proof Machined Round Bars, A286 per AMS 5732 Threaded Round Bars, A286 per AMS 5732 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Outstanding Performance in Extreme Environments

A286 per AMS 5732 maintains remarkable mechanical properties and stability when exposed to high temperatures. This makes it a preferred material for manufacturing components that require both durability and heat resistance, such as jet engine parts, fasteners, and industrial gas turbine components.


Wide Application Across Multiple Industries

From aerospace and automotive to oil and gas and offshore installations, A286 AMS 5732 serves a broad spectrum of sectors. Its flexibility enables usage in blades, bolts, flanges, springs, and other critical parts, providing engineers and fabricators with a reliable option for challenging environments.