Tool Steel : 1.2834 / 105V

Product Description

1.2834 Alloy Steel Round Bar, 105V Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2834 Round Bars, 1.2834 Alloy Steel Round Forged Bars, 1.2834 Double Temper Forged Rods, 1.2834 Black Round Bars, 1.2834 Aircraft Quench Bright Round Bars, 1.2834 Normalised Rolled Round Bars, 1.2834 Austenitise Peeled Round Bars, 1.2834 Proof Machined Round Bars, 1.2834 Threaded Round Bars, 1.2834 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2834 Round Bars: 6mm upto 1200mm

Length for 1.2834 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2834 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2834 Round Bars: Bright & Black

1.2834 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2834 Round Bars, 1.2834 Round Forged Bars, 1.2834 Double Temper Forged Rods, 1.2834 Black Round Bars, 1.2834 Aircraft Quench Bright Round Bars, 1.2834 Normalised Rolled Round Bars, 1.2834 Austenitise Peeled Round Bars, 1.2834 Proof Machined Round Bars, 1.2834 Threaded Round Bars, 1.2834 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2834 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2834 Round Bars, 1.2834 Alloy Steel Round Forged Bars, 1.2834 Double Temper Forged Rods, 1.2834 Black Round Bars, 1.2834 Aircraft Quench Bright Round Bars, 1.2834 Normalised Rolled Round Bars, 1.2834 Austenitise Peeled Round Bars, 1.2834 Proof Machined Round Bars, 1.2834 Threaded Round Bars, 1.2834 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Key Properties of 1.2834 / 105V Tool Steel

This tool steel is distinguished by its excellent durability, toughness, and resistance to abrasion, making it optimal for challenging applications. Its consistent hardness allows for precise machining, while superior wear resistance extends its service life. These properties support demanding tasks in industrial, engineering, and manufacturing environments.


Applications Across Industries

Tool Steel 1.2834 is favored for manufacturing various industrial tools, including cutting implements and forming dies. Its adaptability allows use in sectors ranging from automotive to heavy machinery and specialized engineering. Distributors and suppliers recommend it for both standard and custom tool solutions.