Tool Steel : 1.2080 / X210Cr12

Product Description

1.2080 Alloy Steel Round Bar, X210Cr12 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2083 Round Bars, 1.2083 Alloy Steel Round Forged Bars, 1.2083 Double Temper Forged Rods, 1.2083 Black Round Bars, 1.2083 Aircraft Quench Bright Round Bars, 1.2083 Normalised Rolled Round Bars, 1.2083 Austenitise Peeled Round Bars, 1.2083 Proof Machined Round Bars, 1.2083 Threaded Round Bars, 1.2083 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2083 Round Bars: 6mm upto 1200mm

Length for 1.2083 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2083 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2083 Round Bars: Bright & Black

1.2083 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2083 Round Bars, 1.2083 Round Forged Bars, 1.2083 Double Temper Forged Rods, 1.2083 Black Round Bars, 1.2083 Aircraft Quench Bright Round Bars, 1.2083 Normalised Rolled Round Bars, 1.2083 Austenitise Peeled Round Bars, 1.2083 Proof Machined Round Bars, 1.2083 Threaded Round Bars, 1.2083 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2083 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2083 Round Bars, 1.2083 Alloy Steel Round Forged Bars, 1.2083 Double Temper Forged Rods, 1.2083 Black Round Bars, 1.2083 Aircraft Quench Bright Round Bars, 1.2083 Normalised Rolled Round Bars, 1.2083 Austenitise Peeled Round Bars, 1.2083 Proof Machined Round Bars, 1.2083 Threaded Round Bars, 1.2083 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Durability for Industrial Needs

1.2080 (X210Cr12) Tool Steel stands out for its high durability and resistance to abrasion, making it a preferred choice for industries requiring precise and long-lasting tools. With its excellent wear resistance, it is suitable for repeated and heavy-duty operations that demand optimum strength and reliability over time. This makes it indispensable for tool manufacturers and heavy industries.


Versatile Applications Across Sectors

Engineers and fabricators favour 1.2080 Tool Steel due to its adaptability for various applications. It serves efficiently in manufacturing components like shear blades, forming dies, and stone processing tools. Its ability to maintain sharpness and shape under stress ensures high performance in cutting, drawing, and blanking operations, broadening its utility spectrum in industrial settings.