Austenitic Manganese Steel For Casting : 1.3407 / GX120Mn18

Product Description

1.3407 Alloy Steel Round Bar, GX120Mn18 Rods, Bars(Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.3407 Round Bars, 1.3407 Alloy Steel Round Forged Bars, 1.3407 Double Temper Forged Rods, 1.3407 Black Round Bars, 1.3407 Aircraft Quench Bright Round Bars, 1.3407 Normalised Rolled Round Bars, 1.3407 Austenitise Peeled Round Bars, 1.3407 Proof Machined Round Bars, 1.3407 Threaded Round Bars, 1.3407 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars,

Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged,

Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for 1.3407 Round Bars: 6mm upto 1200mm

Length for 1.3407 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.3407 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.3407 Round Bars: Bright & Black

1.3407 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.3407 Round Bars, 1.3407 Round Forged Bars, 1.3407 Double Temper Forged Rods, 1.3407 Black Round Bars, 1.3407 Aircraft Quench Bright Round Bars, 1.3407 Normalised Rolled Round Bars, 1.3407 Austenitise Peeled Round Bars, 1.3407 Proof Machined Round Bars, 1.3407 Threaded Round Bars, 1.3407 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel 1.3407 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.3407 Round Bars, 1.3407 Alloy Steel Round Forged Bars, 1.3407 Double Temper Forged Rods, 1.3407 Black Round Bars, 1.3407 Aircraft Quench Bright Round Bars,

1.3407 Normalised Rolled Round Bars, 1.3407 Austenitise Peeled Round Bars, 1.3407 Proof Machined Round Bars, 1.3407 Threaded Round Bars, 1.3407 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Durability for Diverse Industries

1.3407 / GX120Mn18 Austenitic Manganese Steel stands out for its remarkable abrasion resistance and work-hardening properties. It is highly sought after in industries requiring robust solutions, including construction, automotive manufacturing, and transportation. The polished finish not only enhances aesthetics but also contributes to improved performance and corrosion resistance, ensuring longevity in harsh operating conditions.


Advanced Production for Superior Quality

Manufactured using hot rolled techniques, this steel guarantees an optimal combination of strength and ductility. The production process enables precise shaping for custom applications, granting manufacturers and fabricators the flexibility needed for diverse projects. Its composition, containing a high percentage of manganese, imparts work-hardening characteristics, maintaining mechanical integrity even under severe stress and impact.