thermostatic expansion Valve

Product Description

A thermal expansion valve is a key element to aheat pump; this is the cycle that makes air conditioning, or air cooling, possible. A basic refrigeration cycle consists of four major elements: acompressor, acondenser, a metering device and anevaporator. As a refrigerant passes through a circuit containing these four elements, air conditioning occurs. The cycle starts when refrigerant enters the compressor in a low-pressure, moderate-temperature, gaseous form. The refrigerant is compressed by the compressor to a high-pressure and high-temperature gaseous state. The high-pressure and high-temperature gas then enters the condenser. The condenser cools the high-pressure and high-temperature gas allowing it to condense to a high-pressure liquid by transferring heat to a lower temperature medium, usually ambient air

In order to produce a cooling effect from the higher pressure liquid, the flow of refrigerant entering the evaporator is restricted by the expansion valve, reducing the pressure and allowingisenthalpicexpansion back into the vapor phase to take place at a lower temperature. A TXV type expansion device has a sensing bulb thats filled with a liquid whose thermodynamic properties are similar to those of the refrigerant. This bulb is thermally connected to the output of the evaporator so that the temperature of the refrigerant that leaves the evaporator can be sensed. The gas pressure in the sensing bulb provides the force to open the TXV, therefore dynamically adjusting the flow of refrigerant inside the evaporator and, as a result, the superheat thats acquired by the refrigerant that exits the evaporator