Inconel : Alloy 825 / 2.4858 / N 08825

Product Description

2.4858 Alloy Steel Round Bar, N 08825 Rods, Alloy 825 Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4858  Round Bars, 2.4858  Alloy Steel Round Forged Bars, 2.4858  Double Temper Forged Rods, 2.4858  Black Round Bars, 2.4858  Aircraft Quench Bright Round Bars, 2.4858  Normalised Rolled Round Bars, 2.4858  Austenitise Peeled Round Bars, 2.4858  Proof Machined Round Bars, 2.4858  Threaded Round Bars, 2.4858  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 2.4858  Round Bars: 6mm upto 1200mm

Length for 2.4858  Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 2.4858  Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 2.4858  Round Bars: Bright & Black

2.4858  Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4858  Round Bars, 2.4858  Round Forged Bars, 2.4858  Double Temper Forged Rods, 2.4858  Black Round Bars, 2.4858  Aircraft Quench Bright Round Bars, 2.4858  Normalised Rolled Round Bars, 2.4858  Austenitise Peeled Round Bars, 2.4858  Proof Machined Round Bars, 2.4858  Threaded Round Bars, 2.4858  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 2.4858  Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 2.4858  Round Bars, 2.4858  Alloy Steel Round Forged Bars, 2.4858  Double Temper Forged Rods, 2.4858  Black Round Bars, 2.4858  Aircraft Quench Bright Round Bars, 2.4858  Normalised Rolled Round Bars, 2.4858  Austenitise Peeled Round Bars, 2.4858  Proof Machined Round Bars, 2.4858  Threaded Round Bars, 2.4858  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Corrosion Resistance in Challenging Environments

Inconel Alloy 825 stands out for its remarkable resistance to both general and localized corrosion, even in highly acidic or oxidative conditions. This property makes it invaluable for use in chemical processing plants, acid production facilities, and pollution-control stations, where standard materials often fail.


Versatile Industrial Applications

The adaptability of Inconel 825 is evident in its broad usage, from oil and gas well piping to nuclear fuel reprocessing. Its durability also lends itself to components in pickling equipment, including heating coils, tanks, baskets, and chains, making it a preferred choice for demanding industry requirements across India.