Hy-Tuf per AMS 6425

Product Description

Hy-Tuf per AMS 6425 Alloy Steel Round Bar, Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel Hy-Tuf per AMS 6425 Round Bars, Hy-Tuf per AMS 6425 Alloy Steel Round Forged Bars, Hy-Tuf per AMS 6425 Double Temper Forged Rods, Hy-Tuf per AMS 6425 Black Round Bars, Hy-Tuf per AMS 6425 Aircraft Quench Bright Round Bars, Hy-Tuf per AMS 6425 Normalised Rolled Round Bars, Hy-Tuf per AMS 6425 Austenitise Peeled Round Bars, Hy-Tuf per AMS 6425 Proof Machined Round Bars, Hy-Tuf per AMS 6425 Threaded Round Bars, Hy-Tuf per AMS 6425 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for Hy-Tuf per AMS 6425 Round Bars: 6mm upto 1200mm

Length for Hy-Tuf per AMS 6425 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of Hy-Tuf per AMS 6425 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for Hy-Tuf per AMS 6425 Round Bars: Bright & Black

Hy-Tuf per AMS 6425 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel Hy-Tuf per AMS 6425 Round Bars, Hy-Tuf per AMS 6425 Round Forged Bars, Hy-Tuf per AMS 6425 Double Temper Forged Rods, Hy-Tuf per AMS 6425 Black Round Bars, Hy-Tuf per AMS 6425 Aircraft Quench Bright Round Bars, Hy-Tuf per AMS 6425 Normalised Rolled Round Bars, Hy-Tuf per AMS 6425 Austenitise Peeled Round Bars, Hy-Tuf per AMS 6425 Proof Machined Round Bars, Hy-Tuf per AMS 6425 Threaded Round Bars, Hy-Tuf per AMS 6425 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel Hy-Tuf per AMS 6425 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel Hy-Tuf per AMS 6425 Round Bars, Hy-Tuf per AMS 6425 Alloy Steel Round Forged Bars, Hy-Tuf per AMS 6425 Double Temper Forged Rods, Hy-Tuf per AMS 6425 Black Round Bars, Hy-Tuf per AMS 6425 Aircraft Quench Bright Round Bars, Hy-Tuf per AMS 6425 Normalised Rolled Round Bars, Hy-Tuf per AMS 6425 Austenitise Peeled Round Bars, Hy-Tuf per AMS 6425 Proof Machined Round Bars, Hy-Tuf per AMS 6425 Threaded Round Bars, Hy-Tuf per AMS 6425 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Aerospace-Grade Reliability

Hy-Tuf per AMS 6425 is engineered for components where failure is not an option, such as in landing gear systems and flap tracks. Its superior mechanical properties ensure longevity and resistance to wear, even under consistent stress and extreme loads, making it a trusted material in the aerospace and defence industries globally.


Precise Manufacturing Standards

Produced according to AMS 6425 standards, this alloy undergoes strict quality controls, ensuring uniformity across each supplied batch. Whether procured as a raw material or fully fabricated part, suppliers and manufacturers in India adhere to rigorous processes to meet customer specifications, guaranteeing reliable performance for every application.