Heat Resistant Casting Alloy : 2.4879 / G-NiCr28W

Product Description

2.4879 Alloy Steel Round Bar, G-NiCr28W Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4879 Round Bars, 2.4879 Alloy Steel Round Forged Bars, 2.4879 Double Temper Forged Rods, 2.4879 Black Round Bars, 2.4879 Aircraft Quench Bright Round Bars, 2.4879 Normalised Rolled Round Bars, 2.4879 Austenitise Peeled Round Bars, 2.4879 Proof Machined Round Bars, 2.4879 Threaded Round Bars, 2.4879 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 2.4879 Round Bars: 6mm upto 1200mm

Length for 2.4879 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 2.4879 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 2.4879 Round Bars: Bright & Black

2.4879 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4879 Round Bars, 2.4879 Round Forged Bars, 2.4879 Double Temper Forged Rods, 2.4879 Black Round Bars, 2.4879 Aircraft Quench Bright Round Bars, 2.4879 Normalised Rolled Round Bars, 2.4879 Austenitise Peeled Round Bars, 2.4879 Proof Machined Round Bars, 2.4879 Threaded Round Bars, 2.4879 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 2.4879 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 2.4879 Round Bars, 2.4879 Alloy Steel Round Forged Bars, 2.4879 Double Temper Forged Rods, 2.4879 Black Round Bars, 2.4879 Aircraft Quench Bright Round Bars, 2.4879 Normalised Rolled Round Bars, 2.4879 Austenitise Peeled Round Bars, 2.4879 Proof Machined Round Bars, 2.4879 Threaded Round Bars, 2.4879 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.