Alloy Special Steel : 1.7709 / 21CrMoV5-7

Product Description

1.7709 Alloy Steel Round Bar, 21CrMoV5-7 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.7709Round Bars, 1.7709Alloy Steel Round Forged Bars, 1.7709Double Temper Forged Rods, 1.7709Black Round Bars, 1.7709Aircraft Quench Bright Round Bars, 1.7709Normalised Rolled Round Bars, 1.7709Austenitise Peeled Round Bars, 1.7709Proof Machined Round Bars, 1.7709Threaded Round Bars, 1.7709Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.7709Round Bars: 6mm upto 1200mm

Length for 1.7709Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.7709Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.7709Round Bars: Bright & Black

1.7709Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.7709Round Bars, 1.7709Round Forged Bars, 1.7709Double Temper Forged Rods, 1.7709Black Round Bars, 1.7709Aircraft Quench Bright Round Bars, 1.7709Normalised Rolled Round Bars, 1.7709Austenitise Peeled Round Bars, 1.7709Proof Machined Round Bars, 1.7709Threaded Round Bars, 1.7709Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.7709Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.7709Round Bars, 1.7709Alloy Steel Round Forged Bars, 1.7709Double Temper Forged Rods, 1.7709Black Round Bars, 1.7709Aircraft Quench Bright Round Bars, 1.7709Normalised Rolled Round Bars, 1.7709Austenitise Peeled Round Bars, 1.7709Proof Machined Round Bars, 1.7709Threaded Round Bars, 1.7709Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Properties for Demanding Applications

1.7709 / 21CrMoV5-7 steel delivers high strength, remarkable toughness, and notable resistance to high temperatures and pressure. These traits make it especially suitable for critical components such as turbine blades, forgings, and pressure vessels, ensuring reliability and longevity in industrial environments.


Expert Supply Chain Network Across India

A comprehensive network of dealers, distributors, exporters, fabricators, manufacturers, retailers, suppliers, traders, and wholesalers ensures the availability of 1.7709 / 21CrMoV5-7 alloy special steel throughout India. This robust supply chain guarantees prompt delivery and technical support for industries requiring high-quality alloy steel.