Austenitic Manganese Steel For Casting : 1.3425 / GX120MnNi13-3

Product Description

1.3425 Alloy Steel Round Bar, GX120MnNi13-3 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.3425 Round Bars, 1.3425 Alloy Steel Round Forged Bars, 1.3425 Double Temper Forged Rods, 1.3425 Black Round Bars, 1.3425 Aircraft Quench Bright Round Bars, 1.3425 Normalised Rolled Round Bars, 1.3425 Austenitise Peeled Round Bars, 1.3425 Proof Machined Round Bars, 1.3425 Threaded Round Bars, 1.3425 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.3425 Round Bars: 6mm upto 1200mm

Length for 1.3425 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.3425 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.3425 Round Bars: Bright & Black

1.3425 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.3425 Round Bars, 1.3425 Round Forged Bars, 1.3425 Double Temper Forged Rods, 1.3425 Black Round Bars, 1.3425 Aircraft Quench Bright Round Bars, 1.3425 Normalised Rolled Round Bars, 1.3425 Austenitise Peeled Round Bars, 1.3425 Proof Machined Round Bars, 1.3425 Threaded Round Bars, 1.3425 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.3425 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.3425 Round Bars, 1.3425 Alloy Steel Round Forged Bars, 1.3425 Double Temper Forged Rods, 1.3425 Black Round Bars, 1.3425 Aircraft Quench Bright Round Bars, 1.3425 Normalised Rolled Round Bars, 1.3425 Austenitise Peeled Round Bars, 1.3425 Proof Machined Round Bars, 1.3425 Threaded Round Bars, 1.3425 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Versatility Across Multiple Industries

Austenitic Manganese Steel (1.3425 / GX120MnNi13-3) serves a wide array of industries, from engineering to shipbuilding. Its unique physical properties adapt well to diverse, challenging environments, satisfying requirements in fields ranging from aerospace to automobile manufacturing. This versatility streamlines procurement and maintenance, making it a preferred choice among Indian suppliers and global customers.


Advanced Casting Process

The manufacturing of GX120MnNi13-3 involves precision casting methods that ensure even distribution of manganese and nickel. This advanced process delivers a product with excellent wear resistance and toughness, reducing downtime caused by component failure. Adherence to stringent quality standards secures reliability for high-stress applications.


Benefits of Austenitic Manganese Steel

Featuring exceptional hardness, high impact tolerance, and self-hardening surface properties, Austenitic Manganese Steel offers longevity and reduced maintenance needs. Its resilience in both abrasive and high-impact conditions makes it valuable for cost-effective, long-term operations in heavy industries.