Tool Steel : 1.2825 / 95MnWCr5

Product Description

1.2825 Alloy Steel Round Bar, 95MnWCr5 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2825 Round Bars, 1.2825 Alloy Steel Round Forged Bars, 1.2825 Double Temper Forged Rods, 1.2825 Black Round Bars, 1.2825 Aircraft Quench Bright Round Bars, 1.2825 Normalised Rolled Round Bars, 1.2825 Austenitise Peeled Round Bars, 1.2825 Proof Machined Round Bars, 1.2825 Threaded Round Bars, 1.2825 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2825 Round Bars: 6mm upto 1200mm

Length for 1.2825 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2825 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2825 Round Bars: Bright & Black

1.2825 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2825 Round Bars, 1.2825 Round Forged Bars, 1.2825 Double Temper Forged Rods, 1.2825 Black Round Bars, 1.2825 Aircraft Quench Bright Round Bars, 1.2825 Normalised Rolled Round Bars, 1.2825 Austenitise Peeled Round Bars, 1.2825 Proof Machined Round Bars, 1.2825 Threaded Round Bars, 1.2825 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2825 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2825 Round Bars, 1.2825 Alloy Steel Round Forged Bars, 1.2825 Double Temper Forged Rods, 1.2825 Black Round Bars, 1.2825 Aircraft Quench Bright Round Bars, 1.2825 Normalised Rolled Round Bars, 1.2825 Austenitise Peeled Round Bars, 1.2825 Proof Machined Round Bars, 1.2825 Threaded Round Bars, 1.2825 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Excellent Performance for Industrial Tools

1.2825 / 95MnWCr5 tool steel is engineered for the demands of modern manufacturing. Its robust properties enable precise fabrication of trimmers and blanking dies, delivering consistent results in high-wear environments. The alloys composition ensures high hardness and edge retention, critical for the performance of cutting tools, broaches, and reamers.


Versatility in Application

Suitable for precision measuring tools, special knives, thread rods, taps, milling cutters, and more, this tool steel adapts to a range of industrial needs. Fabricators and manufacturers across India value its reliability and consistent quality, enhancing productivity and reducing downtime during operations.