Tool Steel : 1.2714 / 55NiCrMoV7

Product Description

1.2714 Alloy Steel Round Bar, 55NiCrMoV7 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2714 Round Bars, 1.2714 Alloy Steel Round Forged Bars, 1.2714 Double Temper Forged Rods, 1.2714 Black Round Bars, 1.2714 Aircraft Quench Bright Round Bars, 1.2714 Normalised Rolled Round Bars, 1.2714 Austenitise Peeled Round Bars, 1.2714 Proof Machined Round Bars, 1.2714 Threaded Round Bars, 1.2714 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2714 Round Bars: 6mm upto 1200mm

Length for 1.2714 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2714 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2714 Round Bars: Bright & Black

1.2714 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2714 Round Bars, 1.2714 Round Forged Bars, 1.2714 Double Temper Forged Rods, 1.2714 Black Round Bars, 1.2714 Aircraft Quench Bright Round Bars, 1.2714 Normalised Rolled Round Bars, 1.2714 Austenitise Peeled Round Bars, 1.2714 Proof Machined Round Bars, 1.2714 Threaded Round Bars, 1.2714 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2714 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2714 Round Bars, 1.2714 Alloy Steel Round Forged Bars, 1.2714 Double Temper Forged Rods, 1.2714 Black Round Bars, 1.2714 Aircraft Quench Bright Round Bars, 1.2714 Normalised Rolled Round Bars, 1.2714 Austenitise Peeled Round Bars, 1.2714 Proof Machined Round Bars, 1.2714 Threaded Round Bars, 1.2714 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Performance Across Industries

1.2714 tool steel is engineered to perform reliably in high-stress industrial situations. Its balanced chemical makeup offers remarkable toughness, even at elevated temperatures, making it suitable for forging dies, plastic injection molds, and various manufacturing applications. From tool producers to large-scale manufacturers, it serves as a backbone material for critical engineering projects and components.


Solutions Tailored for the Indian Market

In India, 1.2714 steel is supplied by a wide network of dealers, exporters, wholesalers, and traders who cater to the specific needs of local engineering and manufacturing sectors. Whether you require raw materials or custom-fabricated parts, Indian suppliers can deliver to strict quality standards, ensuring optimal utility for casting, forging, and plastic mold applications.