Tool Steel : 1.2581 / X30WCrV93 / H21 / SKD5

Product Description

1.2581 Alloy Steel Round Bar, X30WCrV93 Rods, H21 Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2581  Round Bars, 1.2581  Alloy Steel Round Forged Bars, 1.2581  Double Temper Forged Rods, 1.2581  Black Round Bars, 1.2581  Aircraft Quench Bright Round Bars, 1.2581  Normalised Rolled Round Bars, 1.2581  Austenitise Peeled Round Bars, 1.2581  Proof Machined Round Bars, 1.2581  Threaded Round Bars, 1.2581  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2581  Round Bars: 6mm upto 1200mm

Length for 1.2581  Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2581  Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2581  Round Bars: Bright & Black

1.2581  Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2581  Round Bars, 1.2581  Round Forged Bars, 1.2581  Double Temper Forged Rods, 1.2581  Black Round Bars, 1.2581  Aircraft Quench Bright Round Bars, 1.2581  Normalised Rolled Round Bars, 1.2581  Austenitise Peeled Round Bars, 1.2581  Proof Machined Round Bars, 1.2581  Threaded Round Bars, 1.2581  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2581  Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2581  Round Bars, 1.2581  Alloy Steel Round Forged Bars, 1.2581  Double Temper Forged Rods, 1.2581  Black Round Bars, 1.2581  Aircraft Quench Bright Round Bars, 1.2581  Normalised Rolled Round Bars, 1.2581  Austenitise Peeled Round Bars, 1.2581  Proof Machined Round Bars, 1.2581  Threaded Round Bars, 1.2581  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Hot-Work Performance

The 1.2581 (H21) tool steel excels in high-temperature environments where standard steels would fail. Its advanced alloy composition imparts excellent resistance to thermal shock, making it a go-to material for hot working tools such as extrusion dies, forging dies, and knives for industrial scissors. Its durability reduces wear and extends service life in challenging applications.


Versatile Industrial Applications

Engineers and fabricators choose this grade for a broad array of applications, including high load dies, die inserts, press equipment, punches, ejectors, and mandrels. Its reliability and consistent performance under repetitive heating and cooling cycles make it a staple in pressing, stamping, and extrusion industries across India.