Tool Steel : 1.2355 / 50CrMoV13-15

Product Description

1.2355 Alloy Steel Round Bar, 50CrMoV13-15 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2355  Round Bars, 1.2355  Alloy Steel Round Forged Bars, 1.2355  Double Temper Forged Rods, 1.2355  Black Round Bars, 1.2355  Aircraft Quench Bright Round Bars, 1.2355  Normalised Rolled Round Bars, 1.2355  Austenitise Peeled Round Bars, 1.2355  Proof Machined Round Bars, 1.2355  Threaded Round Bars, 1.2355  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2355  Round Bars: 6mm upto 1200mm

Length for 1.2355  Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2355  Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2355  Round Bars: Bright & Black

1.2355  Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2355  Round Bars, 1.2355  Round Forged Bars, 1.2355  Double Temper Forged Rods, 1.2355  Black Round Bars, 1.2355  Aircraft Quench Bright Round Bars, 1.2355  Normalised Rolled Round Bars, 1.2355  Austenitise Peeled Round Bars, 1.2355  Proof Machined Round Bars, 1.2355  Threaded Round Bars, 1.2355  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2355  Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2355  Round Bars, 1.2355  Alloy Steel Round Forged Bars, 1.2355  Double Temper Forged Rods, 1.2355  Black Round Bars, 1.2355  Aircraft Quench Bright Round Bars, 1.2355  Normalised Rolled Round Bars, 1.2355  Austenitise Peeled Round Bars, 1.2355  Proof Machined Round Bars, 1.2355  Threaded Round Bars, 1.2355  Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Superior Mechanical Properties

1.2355 Tool Steel is renowned for its remarkable wear resistance and toughness, vital for tools subjected to extreme stress. Its balanced alloy composition ensures minimal distortion during heat treatment, extending the service life of components used in forming, cutting, and pressing applications. These attributes make it an ideal choice for high-precision tools in both large-scale and specialized production environments.


Broad Application Spectrum

Due to its versatility, Tool Steel 1.2355 is used in a wide range of manufacturing processes, including cold forming, blanking, swaging, and notching. Its adaptability accommodates the production of tools such as dowels, drills, drill plates, and riveting dies. Manufacturers and fabricators across India prefer this steel for its reliability and consistent results in both manual and automatic operations.