Tool Steel : 1.2235 / 80CrV2

Product Description

1.2235 Alloy Steel Round Bar, 80CrV2 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2235 Round Bars, 1.2235 Alloy Steel Round Forged Bars, 1.2235 Double Temper Forged Rods, 1.2235 Black Round Bars, 1.2235 Aircraft Quench Bright Round Bars, 1.2235 Normalised Rolled Round Bars, 1.2235 Austenitise Peeled Round Bars, 1.2235 Proof Machined Round Bars, 1.2235 Threaded Round Bars, 1.2235 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2235 Round Bars: 6mm upto 1200mm

Length for 1.2235 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2235 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2235 Round Bars: Bright & Black

1.2235 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2235 Round Bars, 1.2235 Round Forged Bars, 1.2235 Double Temper Forged Rods, 1.2235 Black Round Bars, 1.2235 Aircraft Quench Bright Round Bars, 1.2235 Normalised Rolled Round Bars, 1.2235 Austenitise Peeled Round Bars, 1.2235 Proof Machined Round Bars, 1.2235 Threaded Round Bars, 1.2235 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2235 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2235 Round Bars, 1.2235 Alloy Steel Round Forged Bars, 1.2235 Double Temper Forged Rods, 1.2235 Black Round Bars, 1.2235 Aircraft Quench Bright Round Bars, 1.2235 Normalised Rolled Round Bars, 1.2235 Austenitise Peeled Round Bars, 1.2235 Proof Machined Round Bars, 1.2235 Threaded Round Bars, 1.2235 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Mechanical Performance

80CrV2 tool steel combines high hardness with exceptional ductility, resulting in superior toughness and resistance to wear. Its chemical composition supports excellent edge stability, which is vital for precision cutting tools and demanding industrial applications. This grade is tailored for intense mechanical processes, boosting efficiency and longevity.


Flexible Applications in Industry

Widely used in manufacturing, engineering, and metalworking, 1.2235 tool steel is ideal for crafting cutting tools, forming dies, and lathe centers. Its robustness allows it to withstand repeated heavy-duty cycles without significant degradation, which is invaluable for high-volume production and custom fabrication projects alike.