Tool Steel : 1.2067 / 102Cr6

Product Description

1.2067 Alloy Steel Round Bar, 102Cr6 Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.2067 Round Bars, 1.2067 Alloy Steel Round Forged Bars, 1.2067 Double Temper Forged Rods, 1.2067 Black Round Bars, 1.2067 Aircraft Quench Bright Round Bars, 1.2067 Normalised Rolled Round Bars, 1.2067 Austenitise Peeled Round Bars, 1.2067 Proof Machined Round Bars, 1.2067 Threaded Round Bars, 1.2067 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 1.2067 Round Bars: 6mm upto 1200mm

Length for 1.2067 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.2067 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 1.2067 Round Bars: Bright & Black

1.2067 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 1.2067 Round Bars, 1.2067 Round Forged Bars, 1.2067 Double Temper Forged Rods, 1.2067 Black Round Bars, 1.2067 Aircraft Quench Bright Round Bars, 1.2067 Normalised Rolled Round Bars, 1.2067 Austenitise Peeled Round Bars, 1.2067 Proof Machined Round Bars, 1.2067 Threaded Round Bars, 1.2067 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 1.2067 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.2067 Round Bars, 1.2067 Alloy Steel Round Forged Bars, 1.2067 Double Temper Forged Rods, 1.2067 Black Round Bars, 1.2067 Aircraft Quench Bright Round Bars, 1.2067 Normalised Rolled Round Bars, 1.2067 Austenitise Peeled Round Bars, 1.2067 Proof Machined Round Bars, 1.2067 Threaded Round Bars, 1.2067 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Engineered for Performance

1.2067 / 102Cr6 Tool Steel delivers robust performance in demanding environments. Its superior hardness and wear resistance make it ideal for manufacturing cutting tools, dies, and bearings. This material retains its properties even under high-stress conditions, ensuring longevity and reduced downtime for industrial operations across India.


Wide-Ranging Applications

From automotive components to intricate engineering parts, 1.2067 tool steel meets diverse requirements. Its consistent quality and machinability allow fabricators and producers to craft products for various sectors. Trusted by traders, wholesalers, and retailers, it supports wide-ranging applications from industrial machines to precision manufacturing.