Nickel Alloy : Alloy HX / 2.4665 / NiCr19Fe19Nb5Mo3 / N06002

Product Description

2.4665 Alloy Steel Round Bar, NiCr19Fe19Nb5Mo3 Rods, Alloy HX Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4665 Round Bars, 2.4665 Alloy Steel Round Forged Bars, 2.4665 Double Temper Forged Rods, 2.4665 Black Round Bars, 2.4665 Aircraft Quench Bright Round Bars, 2.4665 Normalised Rolled Round Bars, 2.4665 Austenitise Peeled Round Bars, 2.4665 Proof Machined Round Bars, 2.4665 Threaded Round Bars, 2.4665 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 2.4665 Round Bars: 6mm upto 1200mm

Length for 2.4665 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 2.4665 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 2.4665 Round Bars: Bright & Black

2.4665 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4665 Round Bars, 2.4665 Round Forged Bars, 2.4665 Double Temper Forged Rods, 2.4665 Black Round Bars, 2.4665 Aircraft Quench Bright Round Bars, 2.4665 Normalised Rolled Round Bars, 2.4665 Austenitise Peeled Round Bars, 2.4665 Proof Machined Round Bars, 2.4665 Threaded Round Bars, 2.4665 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 2.4665 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 2.4665 Round Bars, 2.4665 Alloy Steel Round Forged Bars, 2.4665 Double Temper Forged Rods, 2.4665 Black Round Bars, 2.4665 Aircraft Quench Bright Round Bars, 2.4665 Normalised Rolled Round Bars, 2.4665 Austenitise Peeled Round Bars, 2.4665 Proof Machined Round Bars, 2.4665 Threaded Round Bars, 2.4665 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.