Nickel Alloy : Alloy 90 / 2.4632 / NiCr20Co18Ti / N07090

Product Description

2.4632 Alloy Steel Round Bar, NiCr20Co18Ti Rods, Alloy 90 Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4632Round Bars, 2.4632Alloy Steel Round Forged Bars, 2.4632Double Temper Forged Rods, 2.4632Black Round Bars, 2.4632Aircraft Quench Bright Round Bars, 2.4632Normalised Rolled Round Bars, 2.4632Austenitise Peeled Round Bars, 2.4632Proof Machined Round Bars, 2.4632Threaded Round Bars, 2.4632Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 2.4632Round Bars: 6mm upto 1200mm

Length for 2.4632Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 2.4632Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 2.4632Round Bars: Bright & Black

2.4632Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4632Round Bars, 2.4632Round Forged Bars, 2.4632Double Temper Forged Rods, 2.4632Black Round Bars, 2.4632Aircraft Quench Bright Round Bars, 2.4632Normalised Rolled Round Bars, 2.4632Austenitise Peeled Round Bars, 2.4632Proof Machined Round Bars, 2.4632Threaded Round Bars, 2.4632Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 2.4632Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 2.4632Round Bars, 2.4632Alloy Steel Round Forged Bars, 2.4632Double Temper Forged Rods, 2.4632Black Round Bars, 2.4632Aircraft Quench Bright Round Bars, 2.4632Normalised Rolled Round Bars, 2.4632Austenitise Peeled Round Bars, 2.4632Proof Machined Round Bars, 2.4632Threaded Round Bars, 2.4632Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Performance in Extreme Environments

Nickel Alloy 90 has been engineered for outstanding mechanical strength and resistance to heat-induced degradation. This makes it a preferred choice for industries where components are exposed to high stress and elevated temperatures, such as aerospace and thermal processing. Its robust composition ensures lasting performance, reducing the risk of material failure in demanding operations.


Versatile Applications Across Multiple Sectors

From aerospace engines to high temperature springs in manufacturing equipment, Alloy 90 provides versatility and reliability. Its unique blend of nickel, chromium, cobalt, and titanium allows the alloy to endure thermal cycling and corrosive conditions, serving essential roles in industrial, engineering, and aerospace environments. The alloys adaptability makes it invaluable for critical projects.