Nickel Alloy : Alloy 75 / 2.4951 / NiCr20Ti / N06075

Product Description

2.4951 Alloy Steel Round Bar, NiCr20Ti Rods, Alloy 75 Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4951 Round Bars, 2.4951 Alloy Steel Round Forged Bars, 2.4951 Double Temper Forged Rods, 2.4951 Black Round Bars, 2.4951 Aircraft Quench Bright Round Bars, 2.4951 Normalised Rolled Round Bars, 2.4951 Austenitise Peeled Round Bars, 2.4951 Proof Machined Round Bars, 2.4951 Threaded Round Bars, 2.4951 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 2.4951 Round Bars: 6mm upto 1200mm

Length for 2.4951 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 2.4951 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 2.4951 Round Bars: Bright & Black

2.4951 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4951 Round Bars, 2.4951 Round Forged Bars, 2.4951 Double Temper Forged Rods, 2.4951 Black Round Bars, 2.4951 Aircraft Quench Bright Round Bars, 2.4951 Normalised Rolled Round Bars, 2.4951 Austenitise Peeled Round Bars, 2.4951 Proof Machined Round Bars, 2.4951 Threaded Round Bars, 2.4951 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 2.4951 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 2.4951 Round Bars, 2.4951 Alloy Steel Round Forged Bars, 2.4951 Double Temper Forged Rods, 2.4951 Black Round Bars, 2.4951 Aircraft Quench Bright Round Bars, 2.4951 Normalised Rolled Round Bars, 2.4951 Austenitise Peeled Round Bars, 2.4951 Proof Machined Round Bars, 2.4951 Threaded Round Bars, 2.4951 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Heat Resistance

Alloy 75 maintains structural stability and resists oxidation at temperatures reaching up to 1000C, making it ideal for applications where consistent performance under heat stress is critical. Its unique composition allows it to withstand thermal cycling in turbines, heat treating fixtures, and industrial ovens, extending component lifespan and reliability.


Versatile Applications Across Industries

Thanks to its durable mechanical properties and corrosion resistance, Nickel Alloy 75 is indispensable in demanding environments across manufacturing, engineering, and power generation sectors. Industries rely on this alloy for components exposed to fluctuating temperatures, reducing maintenance needs and downtime.