Inconel 825 Turning Scrap, Inco 825 Turnings, 825 Scrap

Product Description

Material DesignationsUNS N08825W.Nr. 2.4858EN NiCr21MoAFNOR NC21FeDUAISI 825

Chemical Composition RangeNickel (Ni): 38.00 - 46.00Chromium (Cr): 19.50 - 23.50Iron (Fe): 22.00 min (Balance ~28.00 - 32.00)Molybdenum (Mo): 2.50 - 3.50Copper (Cu): 1.50 - 3.00Titanium (Ti): 0.60 - 1.20Aluminum (Al): 0.20 maxManganese (Mn): 1.00 maxSilicon (Si): 0.50 maxCarbon (C): 0.05 maxSulfur (S): 0.03 max

Physical PropertiesDensity: 8.14 g/cm³ (0.294 lb/in³)Melting Range: 1370°C - 1400°C (2500°F - 2550°F)Specific Heat (21°C): 440 J/kg·K (0.105 Btu/lb·°F)Electrical Resistivity (20°C): 1.13 µΩ·mMagnetic Permeability (20°C): 1.005

Mechanical Properties (Typical, Annealed Material Base)Tensile Strength: 580 - 750 MPa (84 - 109 ksi)Yield Strength (0.2% Offset): 240 - 400 MPa (35 - 58 ksi)Elongation: 30% - 50%Hardness: 75 - 90 HRB

Scrap and Foundry Classification (Turnings / Borings)Primary Alloy Category: High-Nickel Iron-Chromium-Molybdenum Superalloy ScrapScrap Forms: Machining Chips, Swarf, Borings, Shavings, Shredded TurningsKey Remelt Criteria: Degreased/Drying Processing required (Oil and Coolant Content < 1.0%), Free of Mixed Carbon Steel or High-Iron Turnings (Magnetic Separation Required), Sulfur <= 0.010% for Melt Heat Addition

Applicable SpecificationsASTM B423 (Seamless Pipe and Tube)ASTM B424 (Plate, Sheet, Strip)ASTM B425 (Rod and Bar)ASTM B564 (Forgings)ASME SB-423 / SB-424 / SB-425 / SB-564NACE MR0175 / ISO 15156