GTD 222 alloy

Product Description

GTD 222 Alloy Steel Round Bar, Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel GTD 222 Round Bars, GTD 222 Alloy Steel Round Forged Bars, GTD 222 Double Temper Forged Rods, GTD 222 Black Round Bars, GTD 222 Aircraft Quench Bright Round Bars, GTD 222 Normalised Rolled Round Bars, GTD 222 Austenitise Peeled Round Bars, GTD 222 Proof Machined Round Bars, GTD 222 Threaded Round Bars, GTD 222 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for GTD 222 Round Bars: 6mm upto 1200mm

Length for GTD 222 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of GTD 222 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for GTD 222 Round Bars: Bright & Black

GTD 222 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel GTD 222 Round Bars, GTD 222 Round Forged Bars, GTD 222 Double Temper Forged Rods, GTD 222 Black Round Bars, GTD 222 Aircraft Quench Bright Round Bars, GTD 222 Normalised Rolled Round Bars, GTD 222 Austenitise Peeled Round Bars, GTD 222 Proof Machined Round Bars, GTD 222 Threaded Round Bars, GTD 222 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel GTD 222 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel GTD 222 Round Bars, GTD 222 Alloy Steel Round Forged Bars, GTD 222 Double Temper Forged Rods, GTD 222 Black Round Bars, GTD 222 Aircraft Quench Bright Round Bars, GTD 222 Normalised Rolled Round Bars, GTD 222 Austenitise Peeled Round Bars, GTD 222 Proof Machined Round Bars, GTD 222 Threaded Round Bars, GTD 222 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Versatility of GTD 222 Alloy

GTD 222 alloy is available in a wide selection of shapes, including Bars, Pipes, Plates, Stripes, Squares, and Wires. Its adaptability allows it to be used in numerous industrial applications such as automotive, aerospace, and power generation. This versatility makes the alloy suitable for both standard and custom-fabricated components.


Extensive Network Across India

There is a comprehensive network of GTD 222 alloy providers in India, including manufacturers, exporters, suppliers, traders, and fabricators. This extensive distribution ensures consistent availability and support for your project needs, irrespective of size or complexity.