Austenitic Manganese Steel For Casting : 1.3410 / GX120MnCr13-2

Product Description

1.3410 Alloy Steel Round Bar, GX120MnCr13-2 Rods, Bars (Normalised, Austenitise, Quench, DoubleTemper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 1.3410 Round Bars, 1.3410 Alloy

Steel Round Forged Bars, 1.3410 Double Temper Forged Rods, 1.3410 Black Round Bars, 1.3410 Aircraft

Quench Bright Round Bars, 1.3410 Normalised Rolled Round Bars, 1.3410 Austenitise Peeled Round

Bars, 1.3410 Proof Machined Round Bars, 1.3410 Threaded Round Bars, 1.3410 Normalized Round Bars,

Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars,

Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods

Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous

Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS),

Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof

Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged,

Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut,

Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined

Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets),

Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting,

Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI,

ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for 1.3410 Round Bars: 6mm upto 1200mm

Length for 1.3410 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 1.3410 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched/ Tempered

Surface Finish for 1.3410 Round Bars: Bright & Black1.3410 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water JetCutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUMDEGASSING (VD) route Alloy Steel 1.3410 Round Bars, 1.3410 Round Forged Bars, 1.3410 Double TemperForged Rods, 1.3410 Black Round Bars, 1.3410 Aircraft Quench Bright Round Bars, 1.3410 NormalisedRolled Round Bars, 1.3410 Austenitise Peeled Round Bars, 1.3410 Proof Machined Round Bars, 1.3410Threaded Round Bars, 1.3410 Normalized Round Bars, Annealed Round Bars, Heat Treated RoundBars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & StressRelieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel 1.3410 Round Bars online ready stock from us at

premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 1.3410 Round Bars, 1.3410 Alloy Steel Round Forged Bars, 1.3410Double Temper Forged Rods, 1.3410 Black Round Bars, 1.3410 Aircraft Quench Bright Round Bars,

1.3410 Normalised Rolled Round Bars, 1.3410 Austenitise Peeled Round Bars, 1.3410 Proof MachinedRound Bars, 1.3410 Threaded Round Bars, 1.3410 Normalized Round Bars, Annealed Round Bars, HeatTreated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Colddrawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlitestructure, etc. kindly do contact us.

Exceptional Durability and Wear Resistance

Austenitic Manganese Steel 1.3410 / GX120MnCr13-2 stands out for its outstanding ability to endure extensive wear and impact. This property makes it a top choice in industries where robust, long-lasting components are essential for maintaining productivity and minimizing downtime. The polished finish and hot rolled technique further enhance its performance attributes.


Versatility in Industrial Applications

This alloy is integrated in applications ranging from mining machinery to rail industry parts. Its unique combination of toughness and hardness after work hardening ensures an optimal lifespan in various machinery and structural segments, supporting a broad ecosystem of suppliers, fabricators, and manufacturers across India.