Austenitic Heat Resisting Nickel Alloy : Alloy 625 / 2.4856 / NiCr22Mo9Nb / N006525

Product Description

2.4856 Alloy Steel Round Bar, NiCr22Mo9Nb Rods, N006525 Bars, Alloy 625 (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4856 Round Bars, 2.4856 Alloy Steel Round Forged Bars, 2.4856 Double Temper Forged Rods, 2.4856 Black Round Bars, 2.4856 Aircraft Quench Bright Round Bars, 2.4856 Normalised Rolled Round Bars, 2.4856 Austenitise Peeled Round Bars, 2.4856 Proof Machined Round Bars, 2.4856 Threaded Round Bars, 2.4856 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN 

Size Range for 2.4856 Round Bars: 6mm upto 1200mm

Length for 2.4856 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 2.4856 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 2.4856 Round Bars: Bright & Black

2.4856 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4856 Round Bars, 2.4856 Round Forged Bars, 2.4856 Double Temper Forged Rods, 2.4856 Black Round Bars, 2.4856 Aircraft Quench Bright Round Bars, 2.4856 Normalised Rolled Round Bars, 2.4856 Austenitise Peeled Round Bars, 2.4856 Proof Machined Round Bars, 2.4856 Threaded Round Bars, 2.4856 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. 

Client can procure smaller quantities of Alloy Steel 2.4856 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 2.4856 Round Bars, 2.4856 Alloy Steel Round Forged Bars, 2.4856 Double Temper Forged Rods, 2.4856 Black Round Bars, 2.4856 Aircraft Quench Bright Round Bars, 2.4856 Normalised Rolled Round Bars, 2.4856 Austenitise Peeled Round Bars, 2.4856 Proof Machined Round Bars, 2.4856 Threaded Round Bars, 2.4856 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Exceptional Corrosion Resistance

Alloy 625 stands out due to its enhanced resistance to a wide range of corrosive agents, including chlorides and acidic solutions. This property makes it a preferred choice for challenging environments found in the chemical and marine industries, as well as for offshore structures exposed to saltwater and aggressive chemicals.


Robust Mechanical Strength in High Temperatures

Inconel 625 maintains its mechanical integrity and toughness across a broad temperature spectrum, even exceeding 1000C. This makes it particularly useful for applications such as waste incineration plants, environmental technology equipment, and chemical reactors where components must withstand extreme heat and stress.


Wide Spectrum of Industrial Applications

From apparatus engineering to shipbuilding and natural gas pipelines, this alloys versatility ensures its suitability for numerous industries. Its unique blend of properties has made it indispensable for fabricators, exporters, and manufacturers in India, who supply Alloy 625 in various customizable forms for diverse industrial requirements.