Austenitic Heat Resistance Nickel Alloy : Alloy 600 / 2.4816 / NiCr15Fe / N06600

Product Description

2.4816 Alloy Steel Round Bar, NiCr15Fe Rods, Alloy 600 Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 2.4816 Round Bars, 2.4816 Alloy Steel Round Forged Bars, 2.4816 Double Temper Forged Rods, 2.4816 Black Round Bars, 2.4816 Aircraft Quench Bright Round Bars, 2.4816 Normalised Rolled Round Bars, 2.4816 Austenitise Peeled Round Bars, 2.4816 Proof Machined Round Bars, 2.4816 Threaded Round Bars, 2.4816 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN Size Range for 2.4816 Round Bars: 6mm upto 1200mmLength for 2.4816 Round Bars: 10mm upto 6000mm depending on material grade & size.Type of 2.4816 Round Bars: Hot Forged & Cold Forged.Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / TemperedSurface Finish for 2.4816 Round Bars: Bright & Black2.4816 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 2.4816 Round Bars, 2.4816 Round Forged Bars, 2.4816 Double Temper Forged Rods, 2.4816 Black Round Bars, 2.4816 Aircraft Quench Bright Round Bars, 2.4816 Normalised Rolled Round Bars, 2.4816 Austenitise Peeled Round Bars, 2.4816 Proof Machined Round Bars, 2.4816 Threaded Round Bars, 2.4816 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Client can procure smaller quantities of Alloy Steel 2.4816 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.If any requirements for Alloy Steel 2.4816 Round Bars, 2.4816 Alloy Steel Round Forged Bars, 2.4816 Double Temper Forged Rods, 2.4816 Black Round Bars, 2.4816 Aircraft Quench Bright Round Bars, 2.4816 Normalised Rolled Round Bars, 2.4816 Austenitise Peeled Round Bars, 2.4816 Proof Machined Round Bars, 2.4816 Threaded Round Bars, 2.4816 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Versatile Applications

Nickel Alloy 600 is engineered for a wide spectrum of industries, such as chemical processing, power generation, and petrochemicals. Its resilience against heat and corrosive substances makes it suitable for equipment like reactors, vessels, furnaces, and heat exchangers. Professionals in India extensively utilize this alloy for component durability and long-lasting performance.


Superior Material Properties

The unique blend of nickel, chromium, and iron in Alloy 600 delivers exceptional resistance to high-temperature oxidation and stress corrosion cracking. Its stable structure ensures excellent mechanical properties under thermal and chemical stress, making it highly reliable for demanding industrial operations.