17-4PH VAR per AMS 5622 Type1

Product Description

17-4PH VAR per AMS 5622 Type1 Alloy Steel Round Bar, Rods, Bars (Normalised, Austenitise, Quench, Double Temper)

Jayant Impex can offer VACUUM DEGASSING (VD) route Alloy Steel 17-4PH VAR per AMS 5622 Type1 Round Bars, 17-4PH VAR per AMS 5622 Type1 Alloy Steel Round Forged Bars, 17-4PH VAR per AMS 5622 Type1 Double Temper Forged Rods, 17-4PH VAR per AMS 5622 Type1 Black Round Bars, 17-4PH VAR per AMS 5622 Type1 Aircraft Quench Bright Round Bars, 17-4PH VAR per AMS 5622 Type1 Normalised Rolled Round Bars, 17-4PH VAR per AMS 5622 Type1 Austenitise Peeled Round Bars, 17-4PH VAR per AMS 5622 Type1 Proof Machined Round Bars, 17-4PH VAR per AMS 5622 Type1 Threaded Round Bars, 17-4PH VAR per AMS 5622 Type1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for 17-4PH VAR per AMS 5622 Type1 Round Bars: 6mm upto 1200mm

Length for 17-4PH VAR per AMS 5622 Type1 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of 17-4PH VAR per AMS 5622 Type1 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for 17-4PH VAR per AMS 5622 Type1 Round Bars: Bright & Black

17-4PH VAR per AMS 5622 Type1 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Alloy Steel 17-4PH VAR per AMS 5622 Type1 Round Bars, 17-4PH VAR per AMS 5622 Type1 Round Forged Bars, 17-4PH VAR per AMS 5622 Type1 Double Temper Forged Rods, 17-4PH VAR per AMS 5622 Type1 Black Round Bars, 17-4PH VAR per AMS 5622 Type1 Aircraft Quench Bright Round Bars, 17-4PH VAR per AMS 5622 Type1 Normalised Rolled Round Bars, 17-4PH VAR per AMS 5622 Type1 Austenitise Peeled Round Bars, 17-4PH VAR per AMS 5622 Type1 Proof Machined Round Bars, 17-4PH VAR per AMS 5622 Type1 Threaded Round Bars, 17-4PH VAR per AMS 5622 Type1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Alloy Steel 17-4PH VAR per AMS 5622 Type1 Round Bars online ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Alloy Steel 17-4PH VAR per AMS 5622 Type1 Round Bars, 17-4PH VAR per AMS 5622 Type1 Alloy Steel Round Forged Bars, 17-4PH VAR per AMS 5622 Type1 Double Temper Forged Rods, 17-4PH VAR per AMS 5622 Type1 Black Round Bars, 17-4PH VAR per AMS 5622 Type1 Aircraft Quench Bright Round Bars, 17-4PH VAR per AMS 5622 Type1 Normalised Rolled Round Bars, 17-4PH VAR per AMS 5622 Type1 Austenitise Peeled Round Bars, 17-4PH VAR per AMS 5622 Type1 Proof Machined Round Bars, 17-4PH VAR per AMS 5622 Type1 Threaded Round Bars, 17-4PH VAR per AMS 5622 Type1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Precision Engineered for Demanding Industries

17-4PH VAR as per AMS 5622 Type 1 is a trusted choice for sectors requiring robust performance under challenging conditions. Thanks to its refined VAR processing, the material offers exceptional cleanliness and superior mechanical properties. Its versatility makes it suitable for aerospace components, valve stems, and chemical processing equipment, underscoring reliability where failure is not an option.


Consistency and Quality Guaranteed

Manufactured in strict compliance with AMS 5622 Type 1 specifications, 17-4PH VAR ensures high uniformity in structure and composition. Suppliers across India maintain rigorous quality controls, allowing manufacturers and fabricators to confidently use this stainless steel for critical applications. Exceptional formability, machinability, and corrosion resistance make it favorable for industrial use.